One 3D printed Mini Dragon Scale Shoulder Pad. This listing is for a single shoulder pad, for both left and right shoulder, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This shoulder pad replaces the stock shoulder pad on either side of the model.

ATTACHING INSTRUCTIONS
Simply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Hammerhead Shark Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Shark Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Demon Skull Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Octopus Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Armadillo Carapace.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This armored carapace replaces the stock carapace included with the kit.

ATTACHING INSTRUCTIONS
1) Butt the carapace up against the back of the stock cowl for best alignment.
2) Center the armor side-to-side on top of the main body, and then glue it into position.
3) Glue the shoulder pads and gun into place on top of the carapace.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Bull Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Siege Saw.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This weapon replaces the standard chain weapon supplied with the kit, and can be used on either side of the model.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
1) Clip the curved wire from the back of the arm of the stock model (see photo).
2) Glue the halves of the lower arm of the stock model together, with the new weapon sandwiched between them.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Torso Extension Unit.

COMPATIBILITY
This accessory component is compatible with ONLY Armiger class Knights. Please view the other listing for parts related to full sized knights.
This part does not replace any existing component, but rather is sandwiched between the legs and torso of the model to make it taller.

ATTACHING INSTRUCTIONS
Glue the extender to the bottom of the torso, so the rear piston ends sandwich the cylindrical detail near the back of the model.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Templar Knight Shoulder Pad. This listing is for a single shoulder pad, for both left and right shoulder, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This shoulder pad replaces the stock shoulder pad on either side of the model.

ATTACHING INSTRUCTIONS
Simply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Rotary Gun for the RIGHT side of the model.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This ranged weapon replaces the stock arm-mounted ranged weapon, and is meant to be used on the RIGHT SIDE of the model (this way the ammunition drum will not hit against the side of the model's body).

ATTACHING INSTRUCTIONS
1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Rotary Gun.
2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One pair of resin cast Mini Wolf Feet (or paws) & Shin Guards.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights. Please view the other listing for parts related to full sized knights.
These feet and shin guards replace the stock feet and shin guards.

ATTACHING INSTRUCTIONS
1) Attach the feet to the bottom of the model's legs.
2) The shin plates rest on top of the feet, in a small slot.
3) The small shin plates can be left standing straight up, or tilted backwards slightly so they rest against the piston of the leg.
4) Once positioned glue into place.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Panther Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights. Please view the other listing for parts related to full sized knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Mirror Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Executioner Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Stalker Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Spartan Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Prow Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Imperial Knight Shoulder Pad. This listing is for a single shoulder pad, for both left and right shoulder, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This shoulder pad replaces the stock shoulder pad on either side of the model.

ATTACHING INSTRUCTIONS
Simply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini War Grounds Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.