One 3D printed Mechanic Shoulder Pad.
This shoulder pad can fit on either side of the model. If you would like one shoulder pad for each side of the model, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Questoris class Knights. This shoulder pad replaces the stock shoulder pad included with the kit.

ATTACHING INSTRUCTIONS
Simply glue this shoulder pad on the model's shoulder, as you would the stock shoulder pad.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Anubis Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights. Please view the other listing for parts related to full sized knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Armadillo Carapace.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This armored carapace replaces the stock carapace included with the kit.

ATTACHING INSTRUCTIONS
1) Butt the carapace up against the back of the stock cowl for best alignment.
2) Center the armor side-to-side on top of the main body, and then glue it into position.
3) Glue the shoulder pads and gun into place on top of the carapace.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Bird Skull head.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This head replaces the stock head.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
Simply insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Bull Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Caliper Manipulator.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This weapon replaces the standard chain weapon supplied with the kit, and can be used on either side of the model.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
1) Clip the curved wire from the back of the arm of the stock model (see photo).
2) Glue the halves of the lower arm of the stock model together, with the new weapon sandwiched between them.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Demon Skull Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Dinosaur Skull head.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This head replaces the stock head.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
Simply insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Dragon Scale Shoulder Pad. This listing is for a single shoulder pad, for both left and right shoulder, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This shoulder pad replaces the stock shoulder pad on either side of the model.

ATTACHING INSTRUCTIONS
Simply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Eagle Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights. Please view the other listing for parts related to full sized knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Executioner Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Fulmination Cannon.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This ranged weapon replaces the stock arm-mounted ranged weapon, and can be used on either side of the model.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Fulmination Cannon.
2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Grav Manipulator.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This ranged weapon replaces the stock arm-mounted ranged weapon, and can be used on either side of the model.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
1) Insert the lower portion of the gun arm from the stock kit into the half-slot of the Grav Manipulator.
2) Glue the cut out section of the gun into place, trapping the arm itself inside, while allowing it to still rotate.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Hammerhead Shark Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One resin cast Mini Horse Skull head.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This head replaces the stock head.

CLEANING INSTRUCTIONS
Add some drops of dish soap to a cup of warm water and stir. Place the component(s) into the soapy water and leave to soak for 5-10 minutes, then thoroughly scrub each piece with an OLD toothbrush. Rinse component(s) thoroughly and allow to dry.

ATTACHING INSTRUCTIONS
Simply insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Imperial Knight Shoulder Pad. This listing is for a single shoulder pad, for both left and right shoulder, please purchase two.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This shoulder pad replaces the stock shoulder pad on either side of the model.

ATTACHING INSTRUCTIONS
Simply glue the shoulder pad in place, where the stock shoulder pad normally sits. This shoulder pad can fit onto either side of the body.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Khopesh Chain Weapon.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights.
This weapon replaces the standard chain weapon supplied with the kit, and can be used on either side of the model.

ATTACHING INSTRUCTIONS
1) Clip the curved wire from the back of the arm of the stock model (see photo).
2) Glue the halves of the lower arm of the stock model together, with the new weapon sandwiched between them.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Mirror Mask.

COMPATIBILITY
This accessory component is compatible ONLY with Armiger class Knights. This mask replaces the stock face choices which are included with the kit.

ATTACHING INSTRUCTIONS
Glue mask onto the front of the skull, where the stock faces normally go.
WARNING: This mask MUST be glued onto the skull! It does not fit OVER the face itself! If you have already glued on the stock face, you wil need to REMOVE IT prior to using this component.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Octopus Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.

One 3D printed Mini Panther Head & Cowl.

COMPATIBILITY
These accessory components are compatible ONLY with Armiger class Knights. Please view the other listing for parts related to full sized knights.
This head and cowl replace the stock head and cowl.

ATTACHING INSTRUCTIONS
WARNING! This head will NOT fit inside the standard cowl which is provided with the kit, as it is far too tight!
1) Glue the cowl into place, where the normal cowl would usually sit.
2) Insert the peg on the top of the head into the hole on the underside of the carapace armor, similar to how the standard kit should be built.



DISCLAIMERS
This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop Limited. Imperial Knight Dominus Valiant, Imperial Knight Dominus Castellan, Imperial Knight Titan, Imperial Knight Warden, Imperial Knight Paladin, Imperial Knight Errant, Imperial Knight Crusader, Imperial Knight Gallant, Armiger Warglaive, Titanicus and the Warhammer 40,000 name are either ® or ™, and/or © Games Workshop Limited, variably registered around the world. Photographs of existing miniature kits are used only to show scale and compatibility with the accessories found on this page. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners. 
Choking hazard. Not meant for children 18 years or younger.
These custom designed conversion components will arrive unpainted.